10 Best Cb Antennas for Trucks for 2026
The ProComm HSD995-4B CB Antenna Kit is a strong pick for truck owners who want two 4-foot antennas with mirror mounts and coax included. The Wilson T2000 suits drivers looking for a stainless-steel whip, while the Prostick 4 Foot Fiberglass CB Antenna Kit offers a 4-foot fiberglass option with a spring-loaded three-way mount.
For quick installation without drilling, the Wilson Little Wil Magnetic CB Antenna and Nagoya CB-72 CB Antenna Kit use magnetic mounts. The shorter Prostick 2-Foot Fiberglass CB Antenna and Luiton 36-Inch CB Antenna suit tighter spaces; the Prostick Fiberglass CB Antenna, Eifagur Soft Whip CB Antenna, and Prostick 4` Foot Fiberglass 1000 Watt cover other antenna styles and lengths.
Choose by antenna length, mounting method, and whether your truck provides a suitable ground plane. A longer antenna may be harder to fit under low clearances, while magnetic mounts need a suitable metal surface.
Tune the antenna in its final mounting position, since placement affects SWR, the standing-wave ratio used to assess antenna matching.
The comparison table summarizes antenna length, antenna style, and mount type for all 10 picks.
Our top picks for cb antennas for trucks
- Best for Dual Antenna Setups: ProComm HSD995-4B CB Antenna Kit includes two 4-foot fiberglass antennas, two mirror mounts, and coax cables for dual antenna setups
- Best for Trucker Antenna Upgrades: Wilson T2000 CB Antenna has a black finish and a 5-inch shaft for truck antenna upgrades
- Best for 4-Foot Fiberglass: Prostick 4 Foot Fiberglass CB Antenna Kit suits truck owners looking for a 4-ft fiberglass antenna kit with a mirror mount and spring
| ProComm HSD995-4B CB Antenna Kit |  | Best for Dual Antenna Setups | Antenna length: 4 ft | Antenna style: Dual fiberglass CB antenna | Mount type: 3-Way aluminum mirror mount | VIEW LATEST PRICE | Read Our Analysis |
| Wilson T2000 CB Antenna |  | Best for Trucker Antenna Upgrades | Antenna length: 49 in | Antenna style: Stainless steel whip | Mount type: 3/8 x 24 | VIEW LATEST PRICE | Read Our Analysis |
| Prostick 4 Foot Fiberglass CB Antenna Kit |  | Best for 4-Foot Fiberglass | Antenna length: 48 in | Antenna style: Fiberglass whip | Mount type: Single-groove mirror mount | VIEW LATEST PRICE | Read Our Analysis |
| Wilson Little Wil Magnetic CB Antenna |  | Best for Magnetic Mounting | Antenna length: 36 in | Antenna style: Stainless steel whip | Mount type: Magnet mount | VIEW LATEST PRICE | Read Our Analysis |
| Nagoya CB-72 CB Antenna Kit |  | Best for Magnetic Mount Setup | Antenna length: 28-inch | Antenna style: CB whip antenna | Mount type: 3.5-inch magnetic mount | VIEW LATEST PRICE | Read Our Analysis |
| Prostick Fiberglass CB Antenna |  | Best for Compact Mirror Mount | Antenna length: 24 in (2 ft) | Antenna style: Fiberglass whip | Mount type: Single-groove mirror mount | VIEW LATEST PRICE | Read Our Analysis |
| Prostick 2-Foot Fiberglass CB Antenna |  | Best for Low-Clearance Trucks | Antenna length: 2 ft | Antenna style: Pre-tuned fiberglass antenna element | Mount type: Compatible with most standard CB mounts and accessories | VIEW LATEST PRICE | Read Our Analysis |
| Eifagur Soft Whip CB Antenna |  | Best for Compact Magnetic Mounting | Antenna length: 9.9 inch | Antenna style: Soft whip CB antenna | Mount type: Magnetic base | VIEW LATEST PRICE | Read Our Analysis |
| Luiton 36-Inch CB Antenna |  | Best for Portable Use | Antenna length: 36 in | Antenna style: CB radio antenna | Mount type: Magnetic base | VIEW LATEST PRICE | Read Our Analysis |
| Prostick 4` Foot Fiberglass 1000 Watt |  | Best for 4ft fiberglass range | Antenna length: 4 ft | Antenna style: Fiberglass CB antenna | VIEW LATEST PRICE | Read Our Analysis |
More Details on Our Top Picks
ProComm HSD995-4B CB Antenna Kit
The 4-foot antennas are top-loaded, helically wound quarter-wave whips with 20-gauge copper wire, and each has a chrome-plated 3/8-24 ferrule. ProComm rates the pair for 750 watts.
The kit includes two 3-way aluminum mirror mounts with SO-239 studs and 9-foot coax cables with molded PL-259 connectors. The 3/8-24 mounting thread suits the included ferrules, while the 9-foot cable length gives you a fixed amount of reach for routing from each mount to the radio. The coax is RG-58 or RG-59, so cable type can vary within the kit.
Skip it if: you can fit just one antenna on a mirror mount.
- Mount type:3-Way aluminum mirror mount
- Antenna length:4 ft
- Antenna style:Dual fiberglass CB antenna
- Mount thread:3/8-24
- Power handling:750 Watt
- Frequency range:CB frequency range
- Cable included:Low loss RG-58 or RG-59 coax
- Cable length:9 ft
Wilson T2000 CB Antenna
For truckers upgrading a mobile setup, the Wilson T2000’s 5-inch shaft and 49-inch whip give you a long stainless-steel antenna suited to a substantial truck-mounted installation. Its black finish keeps the look simple, while the 3,500-watt rating and larger coil housing support higher power handling. It covers 26MHz to 30MHz and is AM/FM ready.
Mounting uses a standard 3/8 x 24 chromed brass ferrule, a common thread style for mobile CB antennas. The stainless-steel whip and larger coil housing make this a heavy-duty option, though its 51-inch overall dimension can be a drawback on trucks with limited overhead clearance. Check the 49-inch whip against your cab height and parking access.
Skip it if: your truck often goes into low-clearance garages; the antenna stands 51 inches overall.
- Mount type:3/8 x 24
- Antenna length:49 in
- Antenna style:Stainless steel whip
- Mount thread:3/8 x 24
- Power handling:3500 Watts
- Frequency range:26MHz to 30MHz
- Cable included:No
- Cable length:—
Prostick 4 Foot Fiberglass CB Antenna Kit
Truck owners needing a 4-foot fiberglass whip and mirror mount get a setup sized for mirror mounting. The 48-inch black element pairs with a three-way aluminum mount and stainless spring. 26–29.5 MHz tuning is factory-set, and its 1000-watt rating states its power capacity. The mount has an SO-239 fitting for PL-259 cable connectors and a 3/8-24 thread.
The VibraSorb design aims to reduce breakage, while chrome-plated machine-brass inserts join the spring and whip. After mounting, tune SWR; owners report adjustment was needed, and one trimmed antenna wire to improve SWR. Others report successful tuning, a reading near 1.3 after adjustment, and years of use. The stainless spring supports antennas up to 5 feet, so it accommodates this 4-foot whip.
Pros: Owner reported successful SWR tuning · Owner reported SWR near 1.3 after adjustment · Owner reported several years of use.
Cons: Owner reported that tuning was needed after installation · Owner described trimming the antenna wire to improve SWR.
Skip it if: you don’t want to adjust SWR; owners report tuning the antenna and trimming its wire.
- Mount type:Single-groove mirror mount
- Antenna length:48 in
- Antenna style:Fiberglass whip
- Mount thread:3/8 in-24
- Power handling:1000 W
- Frequency range:26–29.5 MHz
- Cable included:—
- Cable length:—
Wilson Little Wil Magnetic CB Antenna
Unlike the Wilson T2000, the Wilson Little Wil suits truckers who want a magnetic mount instead of fixed mirror mounting. Its 36-inch stainless steel whip keeps the antenna compact, while the 10-ounce magnet holds the base on a suitable metal surface. The base-loaded design uses a heavy-duty coil with 14-gauge copper wire and is rated for 300 watts of power handling.
Setup centers on placing the magnetic base and routing the coaxial cable; the kit includes the whip, and the mount avoids drilling a fixed bracket into the truck. The black base uses high-impact thermoplastic, with a low-loss coil design. Its short whip limits antenna height compared with taller truck setups, so it may not suit drivers who want a longer antenna above the cab.
Skip it if: there’s no metal surface on your truck for the magnetic base.
- Mount type:Magnet mount
- Antenna length:36 in
- Antenna style:Stainless steel whip
- Mount thread:—
- Power handling:300 W
- Frequency range:—
- Cable included:—
- Cable length:—
Nagoya CB-72 CB Antenna Kit
Truck drivers wanting a magnetic-mount setup on a steel surface will appreciate the Nagoya CB-72. It pairs a 28-inch whip with a 3.5-inch magnetic base and 18 feet of RG-58A/U coax. Set the base vertically on a clean, flat steel surface, then route the cable to a mobile CB radio with a matching SO-239 jack. Its 26–28 MHz range is intended for CB use.
Assembly uses the included Allen wrench, and the magnetic base avoids drilling into the vehicle. It won’t attach to aluminum, fiberglass, glass, plastic, or composite panels, which limits where you can mount it. The PL-259 plug also doesn’t connect directly to handheld radios with SMA jacks.
Antenna performance depends on placement, ground plane, cable routing, and nearby metal, so check SWR before transmitting. Reposition or adjust the setup if needed.
Skip it if: your truck lacks a steel mounting panel; aluminum, fiberglass, glass, plastic, and composite panels won’t work.
- Mount type:3.5-inch magnetic mount
- Antenna length:28-inch
- Antenna style:CB whip antenna
- Mount thread:—
- Power handling:—
- Frequency range:26–28 MHz
- Cable included:18-foot RG-58A/U coax
- Cable length:18 ft
Prostick Fiberglass CB Antenna
For a compact mirror-mount setup, truck owners will find the Prostick Fiberglass CB Antenna a practical fit. Its 24-inch fiberglass whip uses a VibraSorb design, with a three-way aluminum mirror mount and a stainless-steel spring included. The mount has an SO-239 fitting, accepts PL-259 cable connectors, and fits antennas with a standard 3/8-24 thread. The antenna is factory tuned for 26–29.5 MHz and rated for 1000 W.
Installation uses the included single-groove mount, while chrome-plated machine-brass inserts and an electropolished spring support the whip. Its short 2-foot length keeps the setup compact, but a CB-radio forum commenter cautions that a 2-foot antenna can perform worse than a 9-foot antenna. That makes this a better match for a compact mirror installation than for drivers prioritizing the longer antenna option; the included mount is built around a single-groove mirror attachment.
Skip it if: your setup calls for a 9-foot antenna to reach beyond a compact 24-inch whip.
- Mount type:Single-groove mirror mount
- Antenna length:24 in (2 ft)
- Antenna style:Fiberglass whip
- Mount thread:3/8-24 thread
- Power handling:1000 W
- Frequency range:26–29.5 MHz
- Cable included:—
- Cable length:—
Prostick 2-Foot Fiberglass CB Antenna
The 2-foot fiberglass shaft suits truck owners needing low roof clearance and protection from road vibration and weather. Its pre-tuned element covers 26–29.5 MHz and handles up to 1,000 W input. It fits most standard CB mounts and accessories, and the fiberglass construction is designed for road use. The antenna is made in the USA.
Connect it to a CB transmitter and a compatible mount to use it. Owners report that it fit existing mounts, stayed below a truck’s roofline on a bed-rail mount, and worked well for trail use. Its compact size keeps it from getting in the way, but owners have reported limited reach for longer-distance use. One owner also needed to trim the antenna to achieve a lower SWR, the standing-wave ratio used to tune an antenna.
Pros: Owner reported it worked well on a truck bed-rail mount and stayed below the roofline (2025) · Owner reported the compact antenna suited trail use without getting in the way (2022).
Cons: Owner reported weak reception and difficulty getting the antenna set (2018).
Skip it if: you prefer a 5-foot antenna for longer-distance reach.
- Mount type:Compatible with most standard CB mounts and accessories
- Antenna length:2 ft
- Antenna style:Pre-tuned fiberglass antenna element
- Mount thread:—
- Power handling:1000 W
- Frequency range:26–29.5 MHz
- Cable included:—
- Cable length:—
Eifagur Soft Whip CB Antenna
Drivers who need a small antenna for a magnetic mount get a compact setup with the Eifagur Soft Whip CB Antenna. Its 9.9-inch whip has a magnetic base and covers 26–28 MHz, centered at 27 MHz. The kit includes 10 feet of RG-58U coax and a BNC male connector, plus a BNC-female-to-UHF-PL-259 adapter. It’s rated for 30 W maximum RF power and lists a 1.2:1 VSWR.
The magnetic base is designed for a vehicle roof or trunk, and the short whip keeps the antenna compact. The package includes the antenna kit and adapter, while the cable gives you 10 feet to route to your radio. Its 30 W power limit rules it out for setups that need higher RF power. At just 9.9 inches long, this is a compact option for a magnetic-mount installation, rather than a long whip.
Skip it if: your radio setup requires an antenna rated above 30 W.
- Mount type:Magnetic base
- Antenna length:9.9 inch
- Antenna style:Soft whip CB antenna
- Mount thread:—
- Power handling:30 W
- Frequency range:26-28 MHz
- Cable included:RG-58U coax cable
- Cable length:10 ft
Luiton 36-Inch CB Antenna
At 36 inches, the Luiton suits drivers who want a portable CB antenna for indoor or outdoor use. Its compact length makes it easier to move than a longer antenna, while still giving you a 36-inch whip for receiving and transmitting. The antenna covers 27 MHz and has a 300-watt rating, making it a fit for setups that need a magnetic-base antenna rather than a permanent mount.
Installation uses a 4-inch magnetic base and the included 12.8-foot matched-braided coaxial cable, which connects through a PL-259 connector. That gives you a ready cable run to your CB radio, though the cable length can limit where you place the antenna in a large truck cab. The antenna is listed for indoor or outdoor use, and its 12-month warranty covers manufacturing defects.
Skip it if: your mounting setup calls for an antenna over 36 inches long.
- Mount type:Magnetic base
- Antenna length:36 in
- Antenna style:CB radio antenna
- Mount thread:—
- Power handling:300 W
- Frequency range:27 Mhz
- Cable included:Matched-braided coaxial cable
- Cable length:12.8 ft
Prostick 4` Foot Fiberglass 1000 Watt
Truck owners who want a 4-foot fiberglass antenna get a practical fit for setups that need this length and style. The Prostick uses a 4-foot fiberglass mast tuned for the CB frequency range of 26–29.5 MHz, so you can pair it with a CB transmitter without starting with an untuned element. Its 1000-watt input rating suits radios operating within that power limit. A VibraSorb anti-breakage design is intended to improve product life, and the mast joins a nickel-plated brass ferrule.
Installation centers on connecting the antenna to a CB radio transmitter; it operates only when connected to one. The pre-tuned element removes the need to tune the antenna element for the stated CB range, while the brass ferrule and fiberglass mast provide the listed construction. The limitation is that this antenna needs a separate CB transmitter to operate, so it won’t function as a standalone radio accessory. Its 26–29.5 MHz range keeps its stated use focused on CB frequencies.
Skip it if: your truck setup requires an antenna under 4 feet.
- Mount type:—
- Antenna length:4 ft
- Antenna style:Fiberglass CB antenna
- Mount thread:—
- Power handling:1000 watts
- Frequency range:26–29.5 MHz
- Cable included:—
- Cable length:—
Cb Antennas for Trucks: Key Specs Side by Side
Here is how the 10 picks line up on mount type, antenna length, antenna style, power handling and frequency range. Cells marked with a dash are specs the maker leaves out of its listing.
| Pick | Mount type | Antenna length | Antenna style | Power handling | Frequency range |
|---|---|---|---|---|---|
| ProComm HSD995-4B CB Antenna Kit | 3-Way aluminum mirror mount | 4 ft | Dual fiberglass CB antenna | 750 Watt | CB frequency range |
| Wilson T2000 CB Antenna | 3/8 x 24 | 49 in | Stainless steel whip | 3500 Watts | 26MHz to 30MHz |
| Prostick 4 Foot Fiberglass CB Antenna Kit | Single-groove mirror mount | 48 in | Fiberglass whip | 1000 W | 26–29.5 MHz |
| Wilson Little Wil Magnetic CB Antenna | Magnet mount | 36 in | Stainless steel whip | 300 W | — |
| Nagoya CB-72 CB Antenna Kit | 3.5-inch magnetic mount | 28-inch | CB whip antenna | — | 26–28 MHz |
| Prostick Fiberglass CB Antenna | Single-groove mirror mount | 24 in (2 ft) | Fiberglass whip | 1000 W | 26–29.5 MHz |
| Prostick 2-Foot Fiberglass CB Antenna | Compatible with most standard CB mounts and accessories | 2 ft | Pre-tuned fiberglass antenna element | 1000 W | 26–29.5 MHz |
| Eifagur Soft Whip CB Antenna | Magnetic base | 9.9 inch | Soft whip CB antenna | 30 W | 26-28 MHz |
| Luiton 36-Inch CB Antenna | Magnetic base | 36 in | CB radio antenna | 300 W | 27 Mhz |
| Prostick 4` Foot Fiberglass 1000 Watt | — | 4 ft | Fiberglass CB antenna | 1000 watts | 26–29.5 MHz |
Factors to Consider When Choosing CB Antennas for Trucks
Match antenna length to clearance
Measure the space available above and around your truck before choosing an antenna. Account for where the antenna sits, the vehicle’s height, and the routes you drive, then choose a length that fits those limits. A longer antenna may not suit a truck that often enters low-clearance areas, while a shorter one may better fit the mounting location.
As a manufacturer example, Firestik’s FS series ranges from 2 feet to 5 feet: its models are rated at 300 W, 650 W, 900 W, and 1,000 W at lengths of 2, 3, 4, and 5 feet, respectively. Those ratings describe the series, not a promise of better communication from a particular truck installation. Don’t select by length or wattage alone; make sure the antenna fits the truck and its intended mount.
Check mount, thread, and ground plane
The mount needs to support the antenna securely and match its threaded base. Firestik’s FS series uses a 3/8-inch-24 threaded base, a detail that can help you compare antenna compatibility with a mount.
For a single-antenna installation, plan for a metallic ground plane, the conductive surface the antenna uses as part of its radio system. Firestik says its antennas can also be used in a dual co-phased setup on vehicles made from any material. That is a Firestik-specific installation option, not a general rule for every antenna. Choose the setup that suits your vehicle and mounting arrangement.
Compare antenna styles and durability
Antenna construction helps you judge what it may need to handle in daily use. Firestik describes its FS series as a fiberglass antenna with a solid, glass-fiber-reinforced shaft. Its construction also includes heavy insulated solid-copper wire and a water-tight, static-reducing sleeve with UV stabilizers. These are details of Firestik’s FS series, not specifications for the other antennas in the roundup.
Check the construction details that matter for your truck’s exposure and mounting position. The tapered base is intended to reduce loosening from vibration. Frequent vibration may make that feature relevant on your truck. An antenna’s style alone doesn’t show how it will hold up.
Read power ratings in context
Treat a power rating as one specification, not a stand-alone measure of fit or communication range. The FS-series ratings span 300 W to 1,000 W across its 2-foot through 5-foot models. Those figures let you compare the manufacturer’s stated ratings within that series; they don’t establish how well an antenna will work with your particular radio, mount, or installation.
First decide what length fits, then compare stated power ratings among antennas that suit that fit. Keep manufacturer-specific figures attached to the model or series they describe rather than applying them to other antennas.
Plan cable routing and tuning
Plan the antenna’s final mounting position before tuning it. Firestik specifies tuning in the final mounting location for its FS antennas. Moving an antenna after tuning changes the installation, so settle on the mount location first. Route the cable so it can reach the radio without interfering with vehicle use.
Firestik’s FS-series adjustment method uses a removable tip and an adjustment screw: remove the tip, then turn the screw to tune the antenna. This is a Firestik-specific method, not a feature to assume on every antenna. Firestik also states that the FS series is compatible with trucks and carries a 5-year limited warranty.
Frequently Asked Questions
Which CB antenna gives a truck the longest range?
A longer antenna may suit range-focused setups, provided your truck can accommodate its height and mounting position. Among the options here, the Wilson T2000 has a 49-inch whip, while the Prostick compact models are 24 inches long; antenna placement and a suitable ground plane also affect performance.
Should I use one CB antenna or dual co-phased antennas on a semi?
Use one antenna for a simpler setup if your truck has a suitable metallic ground plane at the mounting point. Firestik says its antennas can be used in a dual co-phased setup on vehicles made from any material.
Where should I mount a CB antenna on my truck?
Mount the antenna where it has a suitable ground plane and room to clear overhead obstacles. A mirror mount is a practical option for a truck, while a magnetic mount needs a suitable metal surface; antenna placement affects performance, so tune it where you plan to use it.
How do I tune a truck CB antenna and check its SWR?
Tune the antenna in its final mounting location, then check SWR after installation and adjust the antenna if needed. The Prostick 4 Foot Fiberglass CB Antenna Kit has a factory-set tuning range, but owners report that adjustment was still needed after mounting.
Do I need an NGP antenna for a composite or fiberglass cab?
No, you can use a dual co-phased setup on a vehicle made from composite or fiberglass. A single antenna needs a metallic ground plane, so the mounting arrangement matters as much as the cab material.
Conclusion
If you need a fixed dual-mirror setup, choose the ProComm kit; for a magnetic mount, choose between the compact Wilson Little Wil and the longer Nagoya CB-72 based on the space and cable reach you need. For tight clearance, consider a Prostick 2-Foot Fiberglass CB Antenna, while drivers who want a longer whip can compare the Wilson T2000. After installation, tune the antenna for SWR before transmitting, and make sure the mount suits your truck and the antenna’s thread.
Sources
- Firestik II "FS Series" CB Antennas (firestik.com)
